 |
 |
 |
|
Overview:This is the Hitec DC Powered Ultima X2 Output Charger and Battery Management System. Includes: Hitec Ultima X2 High Output Charger Two Alligator Clamps Tamiya Charging Connector Multiplex Charging Connector Receiver Battery Charging Connector XH Adapter HB/PQ Adapter Instruction Manual
- Input Voltage: DC 11-18V 30A
- Input Connectors: 4mm banana plug with 12 AWG wire
- Charging Current: 0.1~10.0A (max 200W, total 400W)
- Discharging Current: 0.1~5.0A (max 25W, total 50W)
- Balance Connector Type: JST-XH, Poly Quest, Hyperion
- Size: 8.2 x 5.3 x 2.2" (200 x 135 x 57mm)
- Weight: 1.6lbs (727g)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features:
- Compatible with 1-6 cell LiPo, Li-Ion, LiFe, 1-18 cell NiMH, NiCd and 1-12 cells Pb (lead) batteries
- System functions as a charger, discharger, cycler for NiCd, NiMH batteries as well as a charger and balancer for LiPo cells Charging and discharging parameters can be stored for up to ten different batteries
- Mini USB port allows charger to be linked to a PC to view graphs of charge and discharge curves with a capacity, voltage, temperature and ampere display
- Delta peak voltage detection
- 1 to 5 cyclic charging/discharging is operable for battery refreshing and balancing
- USB port for 5V 1A continuous current for powering mobile phones, digital cameras and I-Pods
- Two year limited warranty beginning at date of purchase
|
|
|
|
|
|
|
