The ParkBEC is a switch-mode BEC specifically designed for parkflyer type aircraft. It works with flight batteries from 2 to 8 lithium polymer cells or up to 20 NiCd/NiMH cells. Use up to six 4-9 gram servos or four 17 gram or larger servos without worrying about an overheating BEC. It uses a switching regulator to efficiently convert the high pack voltage into 5V to power your receiver without generating a lot of waste heat.
The ParkBEC installs between your ESC and the receiver, so you don't have to modify your speed control to disable its internal BEC. To ensure that radio interference is minimal, ensure that the ParkBEC is installed at least 2 inches away from your receiver.
Please note: this BEC works differently than most. Read the instructions carefully.
